CNC Shop
My first thought is to say that you should not do it in your home shop. My experience in my home shop has been that machining creates dirt. I use the term dirt very loosely. Dirt in many forms like plasma dust, machining chips, and cutting fluid spray. All of these forms of dirt are very invasive and get into everything. You constantly have to be cleaning just to keep up.
In my home shop experience, I treat every one of my machines differently.My plasma cutter is the dirtiest by far. I built a special room for it to try to contain the plasma dust it creates. My CNC Router is in my main working area. I usually just have to clean around it from time to time.My CNC router is in mind woodworking workshop. It creates a lot of wood chips and wood dust, which all my other woodworking machines do as well.
Factories invest in thousands of dollars in extra machines to keep things clean. These machines purpose is to reduce the amount of dirt in the shop. Some of these machines clean the air and some of these machines take care of the physical chips leftover from machining.
Here are some examples:
Automated Chip Augers - Chip augers are generally at the bottom of CNC machines that create chips. As chips fall down the augers move them over to a collection area. These chips can then be shipped out and recycled.
Downdraft tables –
Downdraft tables are usually associated with plasma or laser cutters.As the plasma cutter is cutting, dirty air is being drafted downward below. This air is then moved through filters, which clean the air and place it back in the shop. They put the air back in to the shop so the building doesn’t have to be continually heated in colder areas of the country.
Updraft Table –
An updraft table works the exact opposite. It pulls the air upward, then through a system of filters.
Water Tables -
Water tables are used mainly with CNC Plasma operations. There is water directly under the piece of metal being cut. The dust and debris of the plasma cutting process is captured by the water table. Over time, the table fills with this debris and must be cleaned out.
Janitorial Services -
Some factories maintain a janitorial service that cleans the facility every night. This is usually dependent on the cost in the area the factory is located.
CNC site and free community site:
If you would like to know more about CNC, head on over to http://www.cncinformation.com
You can join for Free and you get two free CNC ebooks. One is a GCode Quick Guide and the other is the CNC Info Site eBook. You also get access to the Free Video Series…Image to CNC Art when you join the community.
October 11th, 2008
Car security camera systems are a new type of protection system for your car that has many people looking at security with a satisfying grin on their face on the implications for the bad guys. These types of cameras are typically digitally powered.
Because of modern technology their size has been greatly reduced to the extent that they can now stay hidden in most any part of the vehicle. These cameras typically have built in memory chips that have the ability to record up to 680 pictures. Both the time and date are automatically printed out on all the picture frames which can then be utilized as solid evidence and accepted in the court of law.
Stolen Vehicle Tracking System
The miniature cameras that are on the market nowadays have the ability to be installed in a discreet section of the vehicle. These car security systems are useful within a car since they can do verifications when it comes to identifying carjackers, robbers, as well as vandalism. Thefts of vehicles can typically be categorized into temporary thefts, quick strip downs, and exports.
Thefts that are temporary are typically put in the category as vehicles stolen for a joy ride, or utilized as vehicles during and sometimes after committing a robbery. Sports cars and other types of fast vehicles are the typical targets.
Quick strips are vehicles that are brought to a local garage that is commonly referred as a ‘chop shop’, where the vehicle is then stripped off of its valuable parts which are then sold on the black market. With this type of theft the original car is typically never seen again.
In case of the export car theft, thieves that are organized steal the vehicle where it is then rapidly exported out of the country and sold to the highest bidder.
A modern car security camera system normally utilize infrared black and white digital cameras which have the ability to take pictures the instant that there is any type of movement in the area in view. There are other types of cameras which function through the change in picture and not motion. These pictures can be taken through setting the timing within the camera from between 1-60 second intervals. Normally the time and date get printed automatically on the picture.
A camera system known as the Cyber Eye Camera has the ability to capture and store pictures on a 2GB memory chip which can also be expanded if you wish to. These cameras have the ability to be monitored through remote control, and the built-in infrared sensors can also take snapshots of people in the dark with a range of up to ten feet away. These captured images have the ability to be seen on a television screen to help identify the thief.
There are also available on the open market, other wireless car security camera systems which have the ability to be controlled remotely. Some of these cameras have a switch that is operated by foot, which gives the driver the ability to activate the camera systems without calling attention or alarming the offender. Some of these car security camera systems have an optional wireless siren which functions as an effective type of alarm, thereby having the owner of the vehicle alerted to a break-in while snapping pictures of the offender.
To learn more go to Home Security Camera Setups advice and at HD Security Camera tips.
October 11th, 2008